Fence Repair Services › Wrought Iron Fence Repair
Wrought Iron Fence Repair in McKinney, TX
Wrought iron fence repair is different from other fence work because it typically involves welding, rust mitigation, and sometimes hand-straightening of bent components. Most residential iron fences today are actually mild steel, but the repair process is the same. Surface rust is almost always present — the real question is whether it's cosmetic or has eaten into the structural integrity of a picket or rail.
McKinney Fence Repair Pros provides wrought iron fence repair for homeowners across McKinney, TX. Call for a free inspection and a written quote before any work begins.
When to Call
When You Need Wrought Iron Fence Repair
- A section of iron fence was hit by a vehicle and several pickets are bent or snapped
- Rust is actively scaling and flaking from rails and pickets across a section
- A weld has failed where a picket connects to the horizontal rail
- Your iron gate is sagging because the hinge weld cracked at the post
- Bottom rails have rusted through at ground level and the fence is destabilizing
- Paint is bubbling up along the rails, signaling active rust underneath
How It Works
Our Process for Wrought Iron Fence Repair
- 1
Structural vs. cosmetic rust assessment
We probe pickets and rails to determine if rust has penetrated the metal wall or is surface-only. That distinction changes whether a section needs replacement or just prep and coating.
- 2
Bent or broken picket evaluation
Bent pickets sometimes straighten cleanly. Snapped or cracked ones need to be cut out and new sections welded in. We tell you which is which before starting.
- 3
Weld repair or new picket installation
Failed welds get ground clean and re-welded. New picket sections get cut to length, fitted, and welded at both rail connections. We grind welds smooth before priming.
- 4
Rust treatment on affected areas
Active rust gets treated with a rust converter before any primer or paint goes on. Skipping this step just traps active rust under paint — it keeps going.
- 5
Primer and paint on repaired sections
Repaired areas get spot-primed and painted to match the existing finish as closely as possible. A full fence repaint is a separate scope item.
- 6
Gate adjustment if involved
If the gate hinge was welded or repaired, we re-hang the gate, check swing clearance, and confirm the latch catches correctly before finishing.
What's included
- Welding labor for failed weld points or broken picket replacement
- New mild steel picket or rail sections matched to existing profile dimensions
- Rust treatment on all actively rusting surfaces in the repair area
- Spot prime and paint on repaired sections to protect against further rust
- Gate hinge weld repair and re-hanging if the gate is part of the scope
What's not included
- Full fence sandblasting and repaint — that's a separate project with different equipment
- Concrete work on gate posts not directly related to the fence repair scope
- Decorative scroll or custom ironwork fabrication — we do structural repair, not custom fabrication
Real Situations
Common Scenarios in McKinney
A homeowner near historic downtown McKinney has an iron fence with multiple failed weld points along the bottom rail, causing several pickets to pull loose.
We clean the failed weld points back to bare metal and re-weld each picket connection. We check the full fence line for any other welds that are cracking before leaving — finding them now is easier than coming back next month for the same job.
A McKinney property with an iron driveway gate has a gate that won't stay closed because the hinge cracked and the gate is now sitting crooked on the post.
We remove the gate, grind out the cracked hinge weld, and weld a new hinge plate in the correct position. Once the weld is solid and ground smooth, we re-hang the gate, verify the swing arc clears the driveway surface, and adjust the latch strike.
A newer McKinney home has a decorative iron fence where the bottom rail has rusted through at ground contact after the yard sprinkler system kept hitting it for years.
We cut out the rusted-through section of bottom rail and weld in a new section. We treat the surrounding area for rust and prime it before painting. We also let the homeowner know that ground contact plus constant irrigation will keep shortening the life of that rail unless the sprinkler head is adjusted.
McKinney Context
Why this matters in McKinney
Iron fencing is common in older McKinney neighborhoods around the downtown square and in estate-lot subdivisions in the western part of the city. The humidity that comes with North Texas spring and summer accelerates surface rust significantly, especially on fences where the paint film has been broken by impact or just age. Irrigation systems are a major contributing factor — iron fences that get hit by sprinkler overspray on a daily schedule rust out at the base rail faster than anything else we see in McKinney.
Straight Talk
About pricing & scope
Wrought iron repair cost is driven by how much welding is required, how much rust treatment is needed, and whether replacement stock matches the existing picket profile. Thicker decorative pickets cost more than standard round or square stock. Mid-job surprises happen when we clean off a painted surface and find rust has gone further than it appeared — we show you before adding scope rather than just proceeding.
What This Fixes
Problems We See in McKinney
More Fence Repair Services